MIL-DTL-25539C
3.7 Workmanship. The product shall be prepared by such methods as will reflect good
standards of workmanship and quality in the finished product. The wick of the candle shall be
properly centered.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. Conformance inspection (see 4.2).
b. First article testing (see 4.3).
4.2 Conformance inspection. Conformance inspection shall consist of sampling plans
and tests.
4.2.1 Sampling plans and tests.
4.2.1.1 Sampling plan A. Candles shall be inspected by sampling methods in accordance
with MIL-STD-1916, for the examination of product test, as described under 4.5.1.
4.2.1.1.1 At the discretion of the inspecting agency, any action specified in
MIL-STD-1916 for accomplishment by the Government shall be interpreted to mean action to be
accomplished either by or under the supervision of the Government, with the final decision as to
acceptance or rejection in either case resting with the Government inspector.
4.2.1.2 Sampling plan B.
4.2.1.2.1 Lot. For purpose of the sampling plan test, a lot shall consist of all candles
which are constructed from the same batch of materials, and submitted for inspection at
substantially the same, time.
4.2.1.2.2 Sampling tests. Eight candles shall be selected at random from each lot and
subjected to the tests listed below as described under 4.5.
a. Effect of temperature (see 4.5.2).
b. Burning quality (4.5.3).
4.2.1.3 Rejection. When one or more items fail to meet the specified sampling plan
tests, acceptance of all items in the lot shall be withheld until the extent and cause of failure are
determined. The lot for a repeat of the sampling plan tests, the contractor shall fully explain to
the inspector both the corrections made and the cause of previous rejections. Before
resubmitting the lot for a repeat of the sampling plan tests, the contractor shall fully explain to
the inspector both the corrections made and the cause of the previous rejections.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business